The filter returned a non-standard final status of 0xC000000D. The best ways to provide useful, high quality answers.1. Understand the needs and the point of view of the asker and helps us explore If none of this works, then the Motherbard might either have a BIOS corruption or a power management fault and should be returned to the supplier under warranty for like-for-like or higher specification replacement or a full refund.Īnswer helps you, please take the time to rate it. Upgrade to a 650W PSU if you experience any failure or slow spinning of fans.Īfre installing the new PSU, clear the BIOS by disconnecting the power cable and removing the small, silver CMOS battery for 2 minutes and then reinstalling it and then restarting the computer. If it works, shut the computer down, add the CD/DVD drive power cable, and then the case fans, testing as you add each extra device. Make sure the Graphics Card and any other PCI cards are properly in their slots.Ĭonnect only the CPU Power Cable, the Hard Drive power cable and any Graphics card power cable (if you have a separate Graphics Card and it has a power connector) and, leaving the computer open and flat on the floor so you can see all parts inside, test the computer again. Make sure the RAM is properly in the RAM slots. Make sure the CPU and Heatsink are fitted correctly. Make sure the Front Panel Control Header Pins are fitted in the correct orientation. If it is a 2 part connector 20 + 4 pins, make sure the 2 part fit together in the correct orientation. Reinstall the motherboard carefully, making sure the Power Sopply Unit connector is fitted correctly and fully pressed into its socket. Remove the motherboard and make sure there are no misaligned mounting points or loose screws under the motherboard, shorting the solder points under the motherboard when you switch the power on. The Power Supply Unit might either be faulty or under-powered, or their might be another cause.
0 kommentar(er)
